Small vertical injection molding machine ready before the operation and maintenance

Date：2015/3/25 9:43:09

Vertical injection molding machine operations:

      1, the vertical injection molding machine Die: The shift mode organizations pushed to the highest level, plastic mounted on a mobile template, unscrew the fixed template, the proof plastic mold and fixed template and tighten the screw, tighten the plastic lower die Solid on mobile template, transfer molding operation organize, view mold position is not correct.

      2, barrel heating: electric electrical control box is turned on the switch, to participate in a plastic barrel, with plenty of heat to melt the plastic.

      3, injection molding operations: Switch Solenoid 8 shift mode allows the organization to rise with the plastic mold is closed, turn the solenoid valve 6 cylinder injection plunger pressed into injection molding. After completion of the injection valve 6 is turned injection plunger barrel exit pressure, the solenoid valve is turned 8 allows organizations to reduce shift mode, you can open the plastic mold mold.

      Vertical Injection Molding Machine Maintenance:

      1. Check the hydraulic fluid reservoir is not enough, when the lack of timely remedy, should always adhere to clean oil.

      2, according to the rules of timing lubrication points lubrication, regular cleaning filter. Stick around to clean the machine, not so dirt into the fuel tank.

      3, after use should wipe the dirt on the machine, lubrication should be oiled appearance.

      4, the timing to see some electrical eradicate dirt, dust, oil, cleaning electrical contacts persist, often eradicate dirt and dust on the connector.

      Small vertical injection molding machine operating preparations:

      1. Check all machine parts and electrical control box is not outstanding.

      2. Check the oil level in the hydraulic oil situation, oil is not enough to launch a survey of the axial piston valve motor oil is not normal.

      3, open cooling water valve connected to the cooling water.

【Return】