*Vertical mold clamping, vertical injection structure;
* Two groups of independent injection unit consists of two groups of motor oil pump power and can independent action, stable and reliable, and can do 2 at the same time, reduce the cycle time, increase the capacity; Injection unit parallel arrangement of two groups, according to the requirements of the products, can be independent to set the process parameters, make product quality reach the best state.

型号	Model	Units	TY-850.2C
射   出   系   统	螺杆直径	Screw Diameter	mm	Ф32	Ф36
	射出压力	Injection Pressure	Kg/cm2	1662	1313
	理论射出容	Theoretical Shot volume	cm3	96	122
	射出量（P.S)	Max. Shot Weight	g/Oz	86/3.0	109/3.8
	射出率	Injection Rate	cm3/sec	58	73
	温控区	Temperature Control	ZONE	4
	料斗容量	Material Hopper Capacity	L	20
锁   模   系   统	合模力	Clamping Force	T	85
	开模力	Opening Force	T	13.5
	模柱间距	Distance Between Tie Bare	mm	_
	最小模厚	Min Mold Height	mm	200
	开模行程	Opening Stroke	mm	200
	最大开模距	Max. Open Daylight	mm	400
	顶出力量	Ejector Force	T	1.3
	顶出行程	Ejector stoke	mm	40
液   电   力   系   统	作动油量	Pump Output	L	480
	油泵电机	Pump Motor Power	Kw	11+5.5
	电热容量	Barrel Heating Power	Kw	4.1x2
	总用电量	Total Wattage	Kw	24.7
其   他	机器重量	Machine Weight	T	4.6
	机器外形尺寸	Machine Dimensions(L×W×H)	m	2.4x3.1x3.0