New ProductNew Product

Special Machine Series for Oil Seal/Injection Molding Machine

Injection Molding Machine Product Features:

1. Specializing in manufacturing all kinds of industrial and automotive oil seals, mechanical seals and other rubber products;

2. Using high negative pressure vacuum hood design, so that a mold can be in a nearly full vacuum environment, improving mold venting;

序号 No.	项目 Item	单位 Unit	机型项目参数 Model Item Parameters		备注 Remarks
序号 No.	项目 Item	单位 Unit	TOS-100	TOS-150	备注 Remarks
1	锁模力 Clamping Force	ton	100	150
2	开模力 Opening Force	ton	6	6
3	合模力 Closing Force	ton	7.5	7.5
4	主油缸直径 Master Cylinder Diameter	mm	φ280	φ330
5	开模行程 Opening Stroke	mm	140	140
6	移模行程 Moving Stroke	mm	570	670
7	热板间距 Distance between Hot Plates	mm	200	200
8	最小模厚 Minimum Mold Thickness	mm	80	80
9	顶针行程 Ejector Pin Stroke	mm	160	200
10	热板尺寸 Hot Plate Dimensions	mm	350×400	480×450
11	模架板尺寸 Mold Formwork Dimensions	mm	390×420	(无)
12	极限真空度 Ultimate Vacuum	mbar	0.5	0.5
13	抽气速率 Pumping Rate	m3/h	63	63
14	系统压力 System Pressure	Mpa	17	17
15	油泵电机功率 Oil Pump Motor Power	kW	4	4×2
16	加热功率 Heating Power	kW	8.4	12×2
17	装机容量 Installed Capacity	kW	15	36
18	长×宽×高 Length × Width × Height	m	2.2×1×1.9	2.7×2.5×2.8
19	整机重量 Total Weight	T	3	8