Injection molding machine maintenance and precautions demolition order

Date：2016-07-06 09:57:02

1. Injection molding machine maintenance and replacement parts, should consult before removing parts to be replaced in the position of the device assembly drawing, part drawings to find out, you know installation of replacement parts in the assembly of the parts drawing manner and with the assembly of parts between work relationship.
2. Determine the injection molding machine maintenance and replacement parts Removing the demolition order.
Work order to the contrary 3. Removal of the injection molding machine parts should be assembled according to the original parts. Usually after first removing the upper part of the demolition unit, first remove the outer interior demolition, demolition first cannibalize parts on the rear part.
4. When the injection molding machine after the demolition will affect the quality of the connection assembly, or cause damage to some parts (such as the interference of the larger assembly or rivets), should be without disassembly.
5. If you need to manually disassemble the injection molding machine parts hammer hit, is hit parts to pad hardwood or soft metal pad to prevent Jihuai part surface.
6. For the cost of Gao, machining high precision injection molding machine parts to protection, to disassemble and clean screw afterimage hung easily be squeezed, the impact of the store.
7. A pipe fitting injection molding machine, disassemble and clean the valve to be closed for good after the nozzle, to avoid falling into foreign body.
8. For non-directional positioning and labeling requirements of the injection molding machine parts, before removing the assembly to lay the mark.
Injection molding machine parts 9. Each member of a group, after the demolition of cleaning should be placed together to facilitate assembly. Small injection molding machine parts after disassembly and cleaning, to try to immediately install the original position, to avoid losing.

【Return】