Injection Molding Machine Recycling Machine maintenance techniques and procedures

Date：2016-07-15 10:52:01

1, by trained and familiar with the structure and properties of injection molding machines and operating procedures to operate home.

2, strictly follow the rules and operation of the injection molding machine, can not carry out illegal operations in the non-operating stations. To ensure the reliability of safety devices, safety precautions should not undermine the search for efficient injection molding machine.

3, the use of injection molding confidential cleanliness, viscosity and other indicators are in line with the requirements of hydraulic oil in accordance with regulations given as an oil cooler cooling water flow enough to avoid hydraulic components with high temperature piping due to infection or clogging oil, oil spills and other damage to the phenomenon. Injection molding machine should be raised to meet the requirements of deceleration is oil.

4, do not use low-quality feed back with metal impurities or sediment, can not be placed near the mouth of the feed may fall into the metal to prevent wear presses drama filling screw, barrel or the generation stuck, damaging phenomenon.

5, the material temperature does not reach the set temperature, holding time is not enough, they are not allowed to start running screw.

It must report 6, injection molding machine failure or abnormal condition when the person concerned by professional service personnel for processing. Found irregularities affecting safety appear, immediately press the emergency stop switch.

7, pay attention to fire safety, fire extinguishers need to be placed close to the device using the HTF.

【Return】